Synthetics three dimensional mats in saltwater aquariums

It is a nice hobby to have an aquarium and saltwater aquariums are even better.
Below are the opinions of a saltwater (reef) aquarium owner:

I tried several items but Enkamat worked best.

The fibres and the design of the mesh are strong enough to make the necessary modifications on the propeller.

The brand name of the pump is Resun. It was risky to make these change to that pump.

By using Enkamat , the performance increased about 50%.

Actually the pump is not designed for this purpose.

I used a system which is called foam fractination protein skimmer ( a special filter system) which is almost necessary for a salt water aquarium.

If the filter surface is large the filtration is better. Filtration surface is the surface which air touches the water.

The system to enlarge this surface is to create a lot of air bubbles. At this point Enkamat works. Instead of a standard propeller Enkamat mixes the air which the pump aspires and makes small pieces of bubles.

So, the skimmer performance is increased.

Tall white cylinder : protein skimmer. Actually it is clear transparent but because of the air bubbles it is seen as white. More white is better. After using Enkamat it becomes really white.

Enkamat has different colours. Light yellow one is used here. But also black ones are more common.
To my opinion it is risky to make the above changes. So, consult your supplier. It may also damage your system. So, this is only a general information. Everybody takes their own risk and resposibility.

Condensation in Yachts

One of the most important problem of the yachtsmen is condensation. They buy the boats for enjoyment but they continue fighting against condensation.

The difference between inside and outside temperatures causes condensation, especially under mattresses, bunk pads and cushions.

If you use a spacer product under the mattresses you can prevent dampness (condensation) beneath boat beds. So, the mold (odor) will also be decreased or finished.

It works like a air circulation layer. When somebody sits on it with the pumping effect the air circulates.

These spacer synthetics made of a 3 dimensional special Polyamide elastic product.

It can be easily cut to size of the cushions and matresses.

These spacer type products ca be used also in basement floor of hoses where there is humidity, bars in basements, campers, caravans etc...

You can use where you may need a spacing product.

These type of products (eg. Enkaspacer) can be used in several applications.

Condensation in boats, yachts

Yachtsmen have always a condensation problem in theirs yachts. Also mold and mildew.

You know the outside and inside temperature differences causes condensation in the boats. So, especially underside of your mattresses and cushions becomes wet. You should have to leave your mattresses and cushions on the deck to dry.


Using an elastic mat can be an easy solution for that. You can simply cut to size and put the mat under the mattesses.


When somebody sits on it it makes a pumping effect under the mattress or cushion and there will be an air circulation under the cushions. So it will help to prevent the condensation.

The synthetic mat as a flexible layer combats the damaging effects of condensation. Enka-Dry is a flexible three dimensional ventilation layer, which can be placed under and behind mattresses and cushions in boats and caravans preventing the development of damp, mildew and mould.
In the boats it may be used for :

• Under beds to prevent dampness
• Around bilge pumps to prevent clogging
• bottom of wet locker
• rope locker-rope dry quickly
• shelves-to put boxes on

Enka-dry can be also used in:

• yachts,sailing
• boats,
• caravans,
• cruisers,
• motorhomes ,
• tents etc.