industrial - Geosynthetics World

Geosynthetics in Mining: Heap Leach Pads, Tailings Facilities and Containment Systems

The mining industry is one of the largest consumers of geosynthetic materials in the world. The containment of process solutions, the management of tailings waste and the prevention of acid mine drainage to the environment all place demanding hydraulic and chemical requirements on containment systems that geosynthetics are uniquely well-placed to meet. From the copper and gold mines of South America and Africa to the ...

0 Comment 06.07.2026 | labels: industrial

Rain water spray absorbing matting for vehicles

Another use of synthetics 3 dimensional mats. ExSpray is a rain water spray absorbing matting at the inside of mud flaps of trucks and busses. The open structure of the matting "catches" 80% of the rain drops, before spraying out adjacent to the truck. Consequently the rain water spraying effect of the tires is minimized significantly. This results in good view for the cars driving ...

0 Comment 22.02.2008 | labels: Geosynthetics, industrial

Egg incubation / hatching substrate

Use of Enkaflex® as an egg incubation/hatching substrate within IAT “Bluewater” recirculation systems • Used from post eyed to first feeding only. • In 5m diameter fish tanks, used as follows (method is adaptable!). • 6 ‘spokes’ radiating from tank centre, approx. 1m wide (roll width) by 2m long. • Spokes laid ‘smooth side down’ and weighted with clean stones. • Each spoke overlaid with ...

0 Comment 21.02.2008 | labels: aquaculture, aquarium, industrial, spawning

OVAMAT in spawning tanks

Geosynthetics also helps in fishing industry, in fisheries. OVAMAT - The economical way to increase the egg holding capacity of spawning tanks OVAMAT introduces a random 3D mono filament structure throughout the bottom 180mm of the spawning tank creating a significant area of additional space within the existing facilities thus increasing its egg holding capacity. When laid in the bottom of the spawning tank OVAMAT ...

0 Comment 20.01.2008 | labels: aquaculture, aquarium, fishery, industrial, spawning

Where can we use a spunlaid nonwoven?

Applications (nonwoven) : Single ply Under slating Vapor barrier Liquid roofing Crack repair Wall reinforcement Sandpaper Wood bending Protection layer in molds Horticulture Rubber conveyer belts Pipe wrapping Tapes Reinforced plastics / Pultrusion

0 Comment 16.11.2007 | labels: Geotextile, industrial

Metal roofing

Spacer synthetic products are also used in the construction of metal roofs. The functions of these ventilation products are: Drainage and ventilation layer Suitable for use with copper, zinc, steel and aluminium roof panels Entrapped moisture can diffuse out of the roofing structure Allows different movement due to temperature changes Reduction of rainfall noise by up to 50%

0 Comment 13.10.2007 | labels: industrial, metal roofing, shock absorption

Spacers for infusion as flow medium

The fiberglass manufacturing industries like boat, yacht manufacturing, rotorblades of wind turbines the resin flows between the reinforcing layers. To keep glass fibre layers separated and provide an open channel for foams and resins to flow easily and quickly through molded parts a flow media is used as spacer. Very thin but still 3-D structure mats, spacers can be used as an infusion mesh or ...

0 Comment 16.05.2007 | labels: fiberglass, industrial, infusion, injection, resin, spacer, synthetics, vacuum

Sound control-cooling towers

In cooling towers or some other similar structures, the falling water causes noise annoyances. In such cases some products for sound absorption is needed. There are several type of products but sheet type products are easy to install and it is possible to use needed number of sheets. Enkasonic is one of them. Depending on the number of layers used, Enkasonic can reduce noise by ...

0 Comment 15.05.2007 | labels: cooling tower, Geocomposites, industrial, sound control, synthetics

PUR foam injection and RTM processes

PUR foam injection or other RTM (resin transfer moulding) processes, a spacer (Enkaspacer) can be used matting, holding the glass fibre layers in place. The automotive industry (and technology related industries) are often making use of on of the various types of this product. Enkaspacer is a widely used spacer in this industry. Enka-Spacer is a flexible and effective product that can speed up the ...

0 Comment 12.05.2007 | labels: industrial, injection, polyurethane, resin, rtm, spacer, synthetics

Fountains and water displays

In controlling water movement, back splash, and noise in commercial fountains and water displays you may need a material to reduce the sound. Three dimensional products which can control these , can be used used in theme parks, shopping malls, restaurants, museum exhibits etc. For more detail :sport & leisure

0 Comment 10.05.2007 | labels: fountain, Geosynthetics, hobby, industrial, sound control, water display

Рубрика: industrial